Chemical
Chemical
KS ISO 2813:2014
Paints and varnishes - Determination of specular gloss of non-metallic paint film at 20, 60 and 85 .
Specifies a test method for determining the specular gloss of paint films using a reflectometer geometry of 20 60 and 85 ..
Kes 3,437.00
KS ISO 2884-1:1999
Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear.
Specifies the general procedure to be followed in determining the dynamic viscosity of paints, varnishes and related products..
Kes 2,472.00
KS ISO 2884-2: 2003
Paints and varnishes - Determination of viscosity using rotary viscometers Part 2: Disc or ball viscometer operated at specified speed
specifies a general procedure for determining the viscosity of paints, varnishes and related products with a viscosity of up to 34 Pa?s. It is applicable mainly during production and thinning...
Kes 2,884.00
KS ISO 11890-1:2007
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method.
Specifies a method for the determination of the volatile organic compound (VOC) content of paints, varnishes and their raw materials..
Kes 3,038.00
KS ISO 11890-2:2020
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method.
Specifies a method for the determination of the volatile organic compound (VOC) content of paints, varnishes and their raw materials..
Kes 5,407.00
KS ISO 9117-3:2010
Paints and varnishes - Drying tests Part 3: Surface-drying test using ballotini
specifies a test method for determining the surface-drying characteristics of a coating of a paint or varnish which dries by the action of air or by chemical reaction of its components...
Kes 2,163.00
KS ISO 21227-4:2008
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Evaluation of filiform corrosion.
Describes a method for evaluating filiform corrosion by means of digital optical imaging..
Kes 2,884.00
KS ISO 2810:2020
Paints and varnishes - Natural weathering of coatings - Exposure and assessment.
Specifies the conditions which need to be taken into consideration in the selection of type of natural weathering and the natural weathering procedure to be used to determine the resistance of coatings or coating systems..
Kes 3,167.00
KS ISO 1522:2022
Paints and varnishes - pendulum damping test.
Specifies standard conditions for carrying out a pendulum damping test on a single coating or a multicoat system of paint, varnish or related product..
Kes 3,038.00
KS ISO 4624:2016
Paints and varnishes - Pull-off test for adhesion.
Describes methods for determining the adhesion by carrying out a pull-off test on a single coating or a multi-coat system of paint, varnish or related product...
Kes 3,038.00