Chemical
Chemical
KS ISO 8222:2020
Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials)
describes the design, use and calibration of volumetric measures (capacity measures) which are intended for use in fixed locations in a laboratory or in the field. ..
Kes 6,952.00
KS ISO 91-2:1998
Petroleum measurement tables - Part 2: Tables based on reference temperature of 20 .
Refers to computer implementation procedure for the correction of densities and volumes to the reference temperature of 20 ..
Kes 2,472.00
KS ISO 4264:2018
Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation.
Describes a procedure for the calculation of the cetane index of middle-distillate fuels from petroleum-derived sources...
Kes 3,038.00
KS ISO 2909:2002
Petroleum products - Calculation of viscosity index from kinematic viscosity
Describes two procedures for calculating the viscosity index (VI) of petroleum products and related materials, such as lubricating oils, from their kinematic viscosities at 40 ?C and 100?C. Procedure A - is applicable to petroleum products of viscosi..
Kes 3,038.00
KS ISO 2160:1998
Petroleum products - Corrosiveness to copper - Copper strip test.
Specifies a method for the determination of the corrosiveness to copper of liquid petroleum products and certain solvents..
Kes 3,038.00
KS ISO 5165: 1998
Petroleum products - Determination of the ignition quality of diesel fuels- Cetane engine method.
Establishes the rating of diesel fuel oil in terms of an arbitrary scale of cetane numbers using a standard single cylinder, four-stroke cycle, variable compression ratio, indirect injected diesel engine...
Kes 3,437.00
KS ISO 7537: 1997
Petroleum products - Determination of acid number - Semi-micro colour-indicator titration method.
Specifies a semi-micro colour-indicator method for the determination of acidic constituents in new or used petroleum products and lubricants soluble in mixtures of toluene and propan-2-01, or capable of existing as suspensions in such mixtures, and..
Kes 3,038.00
KS ISO 10478: 1994
Petroleum products - Determination of aluminium and silicon in fuel oils - Inductively coupled plasma emission and atomic absorption spectroscopy methods.
Specifies a method for determining the aluminium and Silicon contents of fuel oils at concentrations between 5 mg/kg and 150 mg/kg for aluminium and 10 mg/kg and 250 mg/kg for Silicon using inductively coupled Plasma emission and atomic absorpti..
Kes 2,884.00
KS ISO 6615: 1993
Petroleum products - Determination of carbon residue - Conradson method
Specifies a method for determining the amount of carbon residue, in the range of 0,Ol % (m/m) to 30,O % (m/m), left after evaporation and pyrolysis of an Oil, and is intended to provide some indication of relative Coke-forming tendency...
Kes 3,038.00
KS ISO 10370: 2014
Petroleum products - Determination of carbon residue - Micro method.
Specifies a method for the determination of the amount of carbon residue, in the range 0,10 % (m/m) to 30,0 % (m/m), left after evaporation and pyrolysis of petroleum products under specified conditions...
Kes 3,038.00