Electrotechincal

Electrotechincal



KSIEC 62262:2002+AMD

Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

Classification of the degrees of protection provided by enclosures against external mechanical impacts..

Kes 3,437.00

KS IEC 60529:2013

Degrees of protection provided by enclosures (IP Code)

Applies to the classification of degrees of protection provided by enclosures for electrical equipment with a rated voltage not exceeding 72.5 kV ..

Kes 8,961.00

KS 2566-2: 2015

Design and construction of domestic biogas plants - Code of practice Part 2: Fixed dome

Outlines the requirements for the design and construction of domestic biogas plants that are specific to the fixed dome design and its variants. It builds on the requirements of KS 2566-1 and as such it shall be read in conjunction with KS 2566-1...

Kes 3,308.00

KS 2566-3: 2014

Design and construction of domestic biogas plants - Code of practice Part 3: Floating drum.

Outlines the requirements for the design and construction of domestic biogas plants that are specific to the floating design and its variants...

Kes 3,308.00

KS 2566-1: 2015

Design and construction of domestic biogas plants Code of practice Part 1: General.

Covers all the aspects of biogas production, conveyance, biogas quality improvement and biogas utilization in domestic biogas plants...

Kes 5,407.00

KS IEC 60826:2017

Design criteria of overhead transmission lines

Specifies the loading and strength requirements of overhead lines derived from reliability based design principles..

Kes 8,072.00

KS IEC 60666: 2010

Detection and determination of specified additives in mineral insulating oils.

Concerns the detection and determination of specified additives in unused and used mineral insulating oils...

Kes 5,222.00

KS IEC62321-3-1:2013

Determination of certain substances in electrotechnical products Part 3-1: Screening Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry

Describes the screening analysis of five substances, specifically lead (Pb), mercury (Hg), cadmium (Cd), total chromium (Cr) and total bromine (Br) in uniform materials found in electrotechnical products, using the analytical technique of X-ray fl..

Kes 7,416.00

KS 1869:2009

Determination of solar reflectance near ambient temperature using a portable solar reflectometer - Test method.

Covers a technique for determining the solar reflectance of flat opaque materials in a laboratory or in the field using a commercial portable solar reflectometer..

Kes 2,472.00

KS 1871:2009

Determining resistance of solar collector covers to hail by impact with propelled ice balls - Test method.

Covers a procedure for determining the ability of cover plates for flat-plate for flat-plate solar collectors to withstand impact forces of falling hail..

Kes 3,038.00

Showing 191 to 200 of 918 (92 Pages)