Mechanical

Mechanical Engineering

KS EN 1996-1-1:2005

Eurocode 6: Design of masonry structures Part 1-1: General rules for reinforced and unreinforced masonry structures

applies to the design of buildings and civil engineering works, or parts thereof, in unreinforced, reinforced, prestressed and confined masonry...

Kes 10,094.00

deals with the design of masonry structures for the accidental situation of fire exposure, and is intended to be used in conjunction with EN 1996-1-1, EN 1996-2, 1996-3 and EN 1991-1-2. This part 1-2 only identifies differences from, or supplement..

Kes 7,570.00

KS EN 1996-3:2006

Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures

provides simplified calculation methods to facilitate the design of the following unreinforced masonry walls, subject to certain conditions of application:..

Kes 5,716.00

KS EN 1997-1:2004

Eurocode 7: Geotechnical design Part 1: General rules

Intended to be used as a general basis for the geotechnical aspects of the design of buildings and civil engineering works...

Kes 14,677.00

KS EN 1997-2:2007

Eurocode 7: Geotechnical design- 2: Ground investigation and testing

intended to be used in conjunction with EN 1990:2002, which establishes the principles and requirements for safety and serviceability, describes the basis of design and verification and gives guidelines for related aspects of structural reliability..

Kes 16,377.00

KS EN 1998-2:2005

Eurocode 8: Design of structures for earthquake resistance -2: Bridges

The scope of Eurocode 8 is defined in EN 1998-1:2004, 1.1.1 and the scope of this Standard is defined in 1.1.1. Additional parts of Eurocode 8 are indicated in EN 1998-1:2004, 1.1.3...

Kes 12,669.00

KS EN 1998-3:2005

Eurocode 8: Design of structures for earthquake resistance -3 : Assessment and retrofitting of buildings

The scope of Eurocode 8 is defined in EN 1998-1: 2004, 1.1.1 and the scope of this Standard is defined in (2), (4) and (5). Additional parts of Eurocode 8 are indicated in EN 1998-1: 2004, 1.1.3...

Kes 7,879.00

KS EN 1998-6:2005

Eurocode 8: Design of structures for earthquake resistance 6-: Towers, masts and chimneys

defined in EN 1998-1:2004, 1.1.1 and the scope of this Standard is defined in (2) to (4). Additional parts of Eurocode 8 are indicated in EN 1998-1:2004, 1.1.3...

Kes 6,025.00

KS EN 1998-4:2006

Eurocode 8: Design of structures for earthquake resistance part 4: Silos, tanks and pipelines

The scope of Eurocode 8 is defined in EN 1998-1: 2004, 1.1.1 and the scope of this Standard is defined..