Mechanical
Mechanical Engineering
KS ISO 14531-3:2010
Plastics pipes and fittings-Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels-Metric series-Specifications-Part 3:Fittings for mechanical jointing (including PE-X/
Specifies the physical properties and mechanical-performance requirements for full-end-load-resistant mechanical fittings for use in the connection of crosslinked polyethylene (PE-X) pipes conforming to ISO 14531-1 and in the construction of transiti..
Kes 3,308.00
KS ISO 14531-4:2006
Plastics pipes and fittings-Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels-Metric series-Specifications-Part 4:System design and installation guidelines.
Provides guidance for the design, construction, installation and on-site testing of PE-X pipeline systems...
Kes 3,308.00
KS 2315:2011
Plastics piping and ducting systems- Thermoplastics pipes- Test method for resistance to external blows by the round- the -clock method. WITHDRAWN. Replaced by KS ISO 3127:1994
Specifies a method for determining the resistance to external blows of thermoplastics pipes with circular closs-section by using the round- the- clock method...
Kes 3,038.00
KS ISO 17885:2021
Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications
Specifies the requirements and test methods for mechanical fittings intended to join plastic pressure piping systems including transition fittings to metal pipes..
Kes 5,407.00
KS ISO 13845:2000
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with ang
Specifies a method for testing the leaktightness of assemblies of unplasticized poly(vinyl chloride) (PVC-U) pipes with elastomeric sealing-ring-type socket joints..
Kes 2,163.00
KS ISO 13844:2000
Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure.
Specifies a method for testing the leaktightness of single sockets of unplasticized poly(vinyl chloride) (PVC-U)..
Kes 2,163.00
KS ISO 13846:2000
Plastics piping systems - End-loadbearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure.
Specifies a test method for the long-term leaktightness of end-load-bearing and nonend-load-bearing mechanically jointed assemblies and joints between fittings, ancillaries, valves and thermoplastics pressure pipes, including integral pipe joints..
Kes 2,472.00
KS ISO 17454:2005
Plastics piping systems - Multilayer pipes - Test method for the adhesion of the different layers using a pulling rig.
Specifies a method for testing the adhesion between layers of multilayer pipes using a pulling test rig..
Kes 2,472.00
KS ISO 13783:1997
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure
Specifies a method for testing, while subjected to bending, the leaktightness and strength of assembled end-load-bearing double socket joints of unplasticized poly(vinyl chloride) (PVC-U) which allow a maximum angle of deflection of 3O..
Kes 2,472.00
KS ISO 15875-1: 2003
Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General
specifies the general aspects of crosslinked polyethylene (PE-X) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems),..
Kes 2,884.00